dhunton wrote:Well, that's what I get for limiting my reading to research... I missed this thread entirely. Are all the copies already accounted for? Any chance to still get one?
benjoshua wrote:UPDATE!The prints have arrived at Mike's house! Mike says it looks like they arrived safe and sound, but we won't know for sure until he opens the crate! It's been a long journey, and it's getting close to finished. I am ecstatic!
Prufrock wrote: Place wax paper on top of image and roll the print up so that the image is on the inside of the roll. Martin
Prufrock wrote:Gnat,Read my comment carefully. It is saying - roll up the art so the image is on the inside.Martin
Badmike wrote:Also I'm experimenting with the best way to roll them for tubes since the stock is heavier than I thought and I don't want to bend them. I'll try to get some sort of wax paper to wrap or cover the print in to protect it further.
smarmy1 wrote:Thanks again to the committee members who have seen us to the end of the project. Well done, gentlemen.Just a quick question, Mike. If the stock is heavier than you thought, you might contact the printer to see if he has any advice and/or recommendations on whether the print should be rolled at all. This way you do not have to experiment with the prints. Also, I agree with Bill Barsh. Trying to navigate flights with a tube or package in hand is a nightmare. I would like mine shipped as well.
Badmike wrote:Congrats to Gnat the Beggar...first one to pick up his EO art print! Gnat was so anxious he couldn't wait for a tube or a COA, and came over today to pick it up. Anyone else wanting to drive over early and get their copy is welcome to do so (saves me time!). Note that the Certificates of Authenticity will not be readly until NTRPG Con so if you get your print early you will have to pick it up there or have it sent to you...Mike B.
Gnat the Beggar wrote: HOLY CRAP!
jcp wrote:A middle ground solution is that many places like Aaron Brothers sell both ready made mats and frames. Depending on the size of the print and if it is standard or not, you can very likely purchase your own higher quality mat and a matching frame to go with it for less than $80 pretty easily. Having about the same effort done by the folks across the counter at the same store will cost you double for maybe 20% better results at best. I'd shop around a little, you'd be surprised how nice you can mat and frame a print on your own with ready made pieces. It's better than Target/Walmart options and cheaper than the custom route.