The Acaeum Dungeons & Dragons
Collecting Forums

Grading and staple rust
Post new topic Reply to topic Page 1 of 1
Author

DD.Collector
Active Collector

Posts: 25
Joined: Jan 16, 2012
Last Visit: Oct 30, 2017

Post Posted: Thu Oct 19, 2017 9:26 pm 
 

I am seeking clarification regarding staple rust when grading modules.  My understanding from the Acaeum grading convention guidance is that a module that would otherwise rate at NM can be no higher than VG if it has staples that are completely rusted even if it has no other notable flaws. Is this correct? I know a small amount of rust is ok, 25 percent at F and 10 percent at most for VF.  It seems many people give the grade as it would be without staple rust and just note the rust.  I want to grade my items properly.  So please advise.  Thanks!
  

User avatar
MadCatUSA
Prolific Collector

Posts: 512
Joined: Sep 30, 2015
Last Visit: Dec 12, 2021
Location: California

Post Posted: Fri Oct 20, 2017 10:47 am 
 

I will downgrade by one level if there isn't significant staining from staple rust. If there is significant staining on the cover and interior pages, I'll downgrade by two. It all depends too on what the rest of the module looks like. A NM for me is one that is still in shrink, so the rust may not be apparent.
  

DD.Collector
Active Collector

Posts: 25
Joined: Jan 16, 2012
Last Visit: Oct 30, 2017

Post Posted: Sat Oct 21, 2017 9:33 am 
 

Thanks so much for your advice!
  
Post new topic Reply to topic The Acaeum Forums  •   Collecting General Page 1 of 1